Double Lock Pipe Clamp (rørreparation med en 2 lås aktiv tætningssystemkobling)

  • Model: Greb-d
  • Størrelse: OD φ180-φ2032mm
  • Forsegling: EPDM, NBR, Viton, silikone
  • SS kvalitet: AISI304, AISI316L, AISI316TI
  • Teknisk parameter:Greb-d 【se】

    Produktoplysninger

    SD (2)

    Double Lock Pipe Clamp (rørreparation med en 2 lås aktiv tætningssystemkobling)

    Det passer til store rør, reparationsklemme med todelt type kan reparere røret uden stort installationsrum.

    Arbejdspress op til 30bar.

    The advantage of GRIP-D repair clamps is that is can befitted to existing pipes in situation, without any need to remove and replacing pipes, GRIP-R pipe repair clamp can repair the pipes that are ageing and corrosive and pipe wall has holes or cracks . When installing it, it only needs pipe clamp to wrap the leakage part and tighten the bolt. Then the installation is finished ideally and reliably.

    Udvendigt diameter af greb-d dobbeltlås rørreparationsklemme er fra 180 til 2032mm.

    Rør udvendig diameter Klemmeområde Arbejdstryk Produkt OD Bredde Bolt
    Od Min-Max  Billede 1 Billede 2 B C uden stripindsats med stripindsats (max)
    (Mm) (I.) (Mm) (bar) (bar) (mm) (mm) (mm) (mm) (mm) (mm) (Nm) M
    180 7.087 178-182 16 30 204 142 250 75 10 ~ 25 40 60 M12 × 2
    200 7.874 198-202 16 30 224 142 250 75 10 ~ 25 40 60
    219.1 8.626 216-222 16 30 251.1 142 250 75 10 ~ 25 40 60
    250 9.843 247-253 16 25 282 142 250 75 10 ~ 25 40 80
    267 10.512 264-270 16 25 299 142 250 75 10 ~ 25 40 80
    273 10.748 270-276 16 25 305 142 250 75 10 ~ 25 40 80
    304 11.969 301-307 10 20 336 142 250 75 10 ~ 25 40 80
    323.9 320-327 10 20 355.9 142 250 75 10 ~ 25 40 80
    355.6 14.000 8.5 16 142 250 75 10 ~ 25 40 80
    377 375-379 8.5 16 142 250 75 10 ~ 25 40 80
    406.4 16.000 7.5 16 438 142 250 75 10 ~ 25 40 80
    457.2 18.000 452-462 6.5 12 489 142 250 75 10 ~ 25 40 80
    508 503-513 6 10 540 142 250 75 10 ~ 25 40 120
    558.8 554-564 5.5 10 590.8 142 250 75 10 ~ 25 40 160
    609.6 24.000 605-615 5 10 641.6 142 250 75 10 ~ 25 40 160
    711.2 28.000 708-715 4 5 743.2 142 250 75 10 ~ 25 40 160
    762 30.000 758-766 4 5 794 142 250 75 10 ~ 25 40 160
    812.8 32.000 809-817 4 5 844.8 142 250 75 10 ~ 25 40 160
    914.4 910-918 4 5 142 250 75 10 ~ 25 40 160
    1016 1012-1020 4 5 1048 142 250 75 10 ~ 25 40 200
    1117.6 44.000 1113-1122 3.5 5 142 250 75 10 ~ 25 40 200
    1215-1224 3.5 5 1251.2 142 250 75 10 ~ 25 40 200
    52.000 1316-1325 3 5 142 250 75 10 ~ 25 40 240
    3 5 1454.4 142 250 75 10 ~ 25 40 240
    1524 60.000 1519-1529 2.5 5 1556 142 250 75 10 ~ 25 40 240
    1625.6 2.5 5 142 250 75 10 ~ 25 40 240
    68.000 1722-1732 2.5 5 1759.2 142 250 75 10 ~ 25 40 240
    1824-1834 2 5 142 250 75 10 ~ 25 40 240
    1930.4 1925-1935 2 5 142 250 75 10 ~ 25 40 240
    2032 80.000 2 5 2064 142 250 75 10 ~ 25 40 240

    GRIP-D Materialeudvælgelse

    Materiale / komponenter V1 V2 V3 V4 V5 V6
    Kabinet AISI 304 AISI 316L   AISI 316L Aisi 316ti AISI 304
    Bolte AISI 304 AISI 316L   AISI 304 AISI 304 AISI 4135
    Barer AISI 304 AISI 316L   AISI 304 AISI 304 AISI 4135
               
    Strip Insert (valgfrit) AISI 301 AISI 301   AISI 301 AISI 301 AISI 301

    Materiale af gummipakning

    Medier Temperaturområde
    -30 ℃ op til+120 ℃
    Vand, gas, olie, brændstof og andre hydrocanboner -30 ℃ op til+120 ℃
    Høj temperatur væske, ilt, ozon, vand og så videre -70 ℃ op til+260 ℃
    FPM/FKM Ozon, ilt, syrer, gas, olie og brændstof (kun med stripindsats) 95 ℃ op til+300 ℃
    Whatsapp online chat!